iFixes iN33 2D/3D Torque Screwdriver with Y0.6/Phillips PH000 +1.3mm/Phillips PH000 1.5mm/ P2 Pentalobe 0.8mm/T2/2.5mm bits for mobile phone laptops disassembly repair. iFixes iN33 Fixed Torque screwdriver with 0.36kgf.cm 0.46kgf.cm 0.55kgf.cm 3 fixed torque values for disassembly of various electronic equipment.
Features:
1. iFixes IN33 2D/3D+ factory fixed torque precision torque screwdriver, official screw torque synchronization.
2. There are three fixed torque values: 0.36kgf.cm(Y0.6), 0.46kgf.cm(Phillips 1.3mm/1.5mm), 0.55kgf.cm(Convex Cross 2.5mm/Torx-T2/Pentagon 0.8mm).
3. Fixed torque does not damage screws, corresponding to a standard torque, tighten the screw to a fixed value of force, and the handle will spin to prevent the screw from slipping due to excessive force, the situation of loose tightening may cause scratches on the screw cap.
4. Automatically idle when reaching a fixed torque value, without damaging the screw column chip/circuit board.
5. Standard configuration corresponds to one original torque value batch head, and other bits can be purchased as needed.
6. Carefully designed striving for excellence, each handle torque value is manually calibrated using precision instruments.
7. Fix torque to prevent screw slippage, and sound a prompt when tightening screws.
Please note: the handle of the 2D/3D screwdrivers are the same, the screwdriver bits are different. And the 2D/3D screwdriver bits can be purchased alone.
Option:
1. iFixes iN33 2D screwdriver: Tri-Point Y0.6, P2 Pentalobe 0.8mm, T2, 2.5mm, Phillips PH000 +1.3mm, Phillips PH000 +1.5mm.
2. iFixes iN33 3D screwdriver: Tri-Point Y0.6, Phillips PH000 +1.3mm, P2 Pentalobe 0.8mm.
